QUANTUM BREW / WATER AND COFFEE
Water for coffee: minerals, hardness and how to choose
Published on
English version:
Updated

To choose water for coffee, first identify its source and composition. Separate hardness from alkalinity, then compare two waters using the same coffee recipe. If you make espresso, also check your machine manufacturer’s requirements.
When comparing waters for brewing coffee, it is tempting to look for one number that tells us which to choose. But a label, a measurement and a tasting impression describe different things. Keeping them separate helps us ask better questions and maintain a meaningful record.
Choosing water for coffee
Searching for the “best water for coffee” becomes more useful when you turn it into a practical decision: which options can you obtain, document and prepare again? This table suggests what to check before comparing them; it does not rank waters from best to worst.
| Water | What to check | How to frame the comparison |
|---|---|---|
| Tap | Your supplier’s report, supply area and the date of the data. | Use it as your usual brewing reference if it is the water you already use. |
| Filtered | Filter model, maintenance and the parameters it claims to change. | Document the treatment before attributing a change in the cup to it. |
| Bottled | The source and minerals declared on that bottle’s label. | Choose options you can identify again; compare more than brand names. |
| Distilled | If using it as a base for a mineral product, check that product’s instructions and required volume. | Record the base water, product and specified proportion; do not improvise a dose. |
| Reverse osmosis | System information and measurements of the water it produces. | Record the actual result before choosing a remineralisation recipe. |
For bottled water, start by reading the water label. If you are considering adding minerals, read the guide to minerals for coffee and the comparison of coffee mineral drops and sachets. The format does not replace knowing the composition, base water and product instructions.
Hardness, alkalinity, pH and TDS at a glance
Keep the full name of each measurement. Two similar numbers may describe different properties.
| Measurement | What it describes | What to record | It is not equivalent to |
|---|---|---|---|
| Hardness | Mainly dissolved calcium and magnesium. | Value and unit, such as mg/L as CaCO₃. | Calcium alone or all minerals. |
| Alkalinity | Capacity to neutralise acids. | Value and unit, such as mg/L as CaCO₃. | pH. |
| pH | Acidic or basic state. | Value and measurement conditions. | Capacity to neutralise acids. |
| TDS / dissolved solids | An overall amount; some meters estimate it using conductivity. | Value, unit, instrument and method. | An analysis of each ion. |
Hardness: one part of the composition
Hardness mainly relates to dissolved calcium and magnesium. It should therefore not be used as a synonym for “all minerals”. The unit matters too: a calcium concentration in milligrams per litre is not the same measurement as hardness expressed as calcium carbonate equivalent.
Alkalinity and pH answer different questions
Alkalinity describes water’s ability to neutralise acids. pH describes how acidic or basic it is under specific conditions. Recording one does not replace the other. When comparing waters, keep the unit and method for each value instead of grouping them under a vague label such as “stronger water”.
A dissolved-solids value does not identify each ion
Dissolved-solids data summarise an amount; conductivity is related to ions and can be used to estimate that amount. To understand the composition, you need information about the individual components. Avoid filling a table with inferred values simply because an overall figure matches.
Water for espresso: check your machine
Your preference in the cup and an espresso machine’s requirements are separate decisions. Before using water or a mineral product for espresso, compare its data with the manufacturer’s specifications for your model. La Marzocco’s home espresso water guide illustrates why those requirements matter. A TDS reading alone does not confirm compatibility.
Your first comparison, step by step
- Choose one question. For example: “What differences do I notice between my usual water and this bottled water?” Start with two identifiable options.
- Gather the available data. Keep the label or report and its date. If you measure anything, record the instrument, method and unit. Mark what you do not know.
- Keep the preparation consistent. Use the same coffee, dose, grind, water amount and method. Note any accidental changes.
- Taste and record. Give the samples codes and compare them at similar temperatures. The guide to comparing cups of coffee helps separate a difference from a preference.
- Repeat before deciding. Check your notes against another preparation and consider availability, cost and how easily you can repeat the result.
You do not need to start by buying salts or finding a universal recipe. First establish which water you have and which question you want to answer.
The cup offers a different kind of information
A sensory record captures what you perceived in one preparation. It does not turn that perception into a fixed property of a salt. It is more useful to write “I perceived less acidity in this comparison” than “this mineral always reduces acidity”. The first statement preserves the context; the second requires evidence that a single tasting cannot provide.
A simple starting record
Record the water and its origin; the source and date of the data; the coffee, method and preparation; the reference sample; the attributes you observed and any uncertainties. If a value is missing, write “not available”. If you did not assess an attribute, leave it unassessed. Do not fill the gaps with assumptions.
ION LAB invites you to explore water with five salts and record your impressions. The interactive tasting tool helps organise those observations; it does not calculate doses or predict flavours. Use only validated instructions for the kit. You can continue learning through the information on the water for coffee course.

